ECR · Home Renovation Interior Designers
Home Renovation Interior Designers in ECR
Older homes along ECR have lived through years of sea air, and it shows in rusted hinges, swollen cupboard doors and flaking paint near windows. Renovating them is about finding the damage that is not yet visible, choosing materials that will last this time, and sequencing the work sensibly.
Typical budget
3BHK in ECR
- Basic₹3.1L – ₹5.8L
≈ ₹160/sq ft – ₹290/sq ft
- Premium₹3.8L – ₹7L
≈ ₹190/sq ft – ₹350/sq ft
- Popular hereUltra Premium₹4.4L – ₹8.2L
≈ ₹220/sq ft – ₹410/sq ft
Estimates only, pre-GST and subject to change. Every price on this page comes from the same rate card as our calculator (updated 28 October 2026), so they all update together. Your designer confirms the final figure after a free site visit.
Quick answer
Elixir's renovation designers on ECR help owners of older beach houses and villas replace salt-damaged interiors, fix underlying issues and upgrade finishes in a controlled sequence. Carpentry and finishes for a typical 3BHK cost approximately ₹3.1L – ₹5.8L in Basic to ₹4.4L – ₹8.2L in Ultra Premium, pre-GST, with repairs quoted after a site audit. Start with a free consultation.
Our approach
How we handle home renovation interior projects
What we plan for
- Site audit before design
- Reuse versus replace decisions
- Civil, electrical, and plumbing coordination
- Phased execution for occupied homes
What drives the cost
- Demolition and repair scope
- Condition of existing services
- Custom carpentry replacement
- Flooring, ceiling, and wall finish changes
Materials we recommend
- Inspect moisture damage before cabinet planning
- Upgrade electrical points before final carpentry
- Choose repairable finishes for older homes
- Confirm wall levels before paneling or tall storage
Mistakes to avoid
- Quoting renovation without a site audit
- Hiding old service issues behind new finishes
- Changing design after demolition begins
- Underestimating dust control and family disruption
ECR · PIN 600115, 600041
Planning interiors in ECR
The East Coast Road beach belt, known for independent villas, luxury gated communities and weekend homes along the sea.
- Salt corrosion on ECR often affects concealed items such as electrical conduits, switch boxes and window fittings, so a renovation audit should look beyond visible furniture.
- Cabinets built with ordinary plywood or particle board in older beach houses frequently swell and delaminate, and replacing them with BWP plywood and sealed edges avoids repeating the problem.
- Walls facing the sea can carry salt deposits that affect paint and plaster adhesion, and these need treatment and drying before new carpentry is fixed against them.
- Many renovations on ECR are of weekend homes, which can make phased work easier, since the family is not living on site during the main stages.
Our work
Homes we've designed near ECR
Real Elixir homes in Chennai. Every project is measured, designed, produced and installed by our team.
Velachery Chennai · 1250 sq ft · 8 weeks
Adyar Chennai · 1620 sq ft · 5 weeks
Nungambakkam Chennai · 1800 sq ft · 6 weeks
Talk to a real designer
Numbers are a starting point. A designer gets you the real one.
Every home is different. A 20-minute conversation with one of our designers usually narrows the range a lot, and often finds savings you wouldn't spot on your own. It's free and there's no obligation.
Before & after
A better version of your home
Drag the slider to see what a well-planned interior does to the same room. Premium finishes and smart storage, planned around how you live.
Try it yourself
Estimate your own home
Adjust the home size, package and scope. Numbers update instantly using the same rate card as this page.
Use the carpet area from your sale agreement, not super built-up.
Your approximate estimate
₹4.4L – ₹8.2L
≈ ₹220/sq ft – ₹410/sq ft of carpet area · pre-GST
- Living room₹50K – ₹94K
- Modular kitchen₹97K – ₹1.8L
- Bedroom (wardrobe, bed, side units) × 3₹2.4L – ₹4.6L
- Bathroom vanity & storage × 3₹19K – ₹37K
- Dining & crockery₹26K – ₹49K
A rough guide only. Layout, finishes, hardware and site conditions can move the final number in either direction, and a designer can usually find ways to fit your budget.
Plan smarter
Five ways to keep your budget on track
- 01
Audit for salt damage first
Check fittings, conduits, window frames and walls for corrosion and damp before the design is finalised.
- 02
Replace rather than patch corroded hardware
Swap all old hinges, channels and handles for stainless or marine-grade versions instead of fixing only the worst ones.
- 03
Upgrade boards in wet and sea-facing areas
Use BWP plywood in kitchens, bathrooms and sea-facing rooms, where older materials usually fail first.
- 04
Fix services before new carpentry
Complete rewiring, plumbing and plaster repair first, so new cabinets are not opened up later.
- 05
Freeze decisions before demolition
Agree on layouts and finishes before breaking out old units to avoid costly changes mid-way.
Happy homes
2,500+ Chennai families have moved in with Elixir
Since 2013, we've designed and built homes across Chennai, backed by a 12-year woodwork warranty and after-care from the same team.
Priya & Arvind
4BHK in Anna Nagar, Chennai.
"Small space, big impact. Every corner feels intentional. It's deeply personal."
Materials & hardware partners
FAQ
Questions homeowners ask
Still unsure? Our designers are happy to answer anything on a call.
Why do older ECR interiors deteriorate so quickly?
Salt-laden air and high humidity corrode ordinary metal fittings and swell poorly sealed boards. Choosing marine-grade hardware and BWP plywood in renovation addresses the root cause.
Can any existing furniture be saved?
Solid wood pieces in good condition can often be refinished and reused. Particle-board or swollen plywood units usually need replacing.
Do you coordinate rewiring and plumbing?
Yes. Elixir coordinates civil, electrical and plumbing work needed for the interior scope, based on what the site audit finds.
Is it easier to renovate a weekend home?
Often, since work can proceed without the family living on site. We share progress updates remotely between your visits.
How long does an ECR renovation take?
It depends on repair scope. Once civil work is complete and the design approved, factory production typically takes 15–20 working days before installation.
Keep exploring
Related guides
Get a number you can actually plan with
Online estimates are a starting point. Our designers visit, measure and give you an itemised quote, usually within a week.