Pammal · Modular Kitchen Designers
Modular Kitchen Designers in Pammal
Many Pammal kitchens are a single counter along one wall, and fitting a hob, sink, fridge and enough storage into that length takes careful planning. Elixir's kitchen designers work upwards, with wall cabinets and a loft, and choose drawer layouts that make the most of a short base run.
Typical budget
2BHK in Pammal, modular kitchen only
- Popular hereBasic₹50K – ₹93K
≈ ₹60/sq ft – ₹110/sq ft
- Premium₹60K – ₹1.1L
≈ ₹70/sq ft – ₹130/sq ft
- Ultra Premium₹70K – ₹1.3L
≈ ₹80/sq ft – ₹150/sq ft
Estimates only, pre-GST and subject to change. Every price on this page comes from the same rate card as our calculator (updated 28 October 2026), so they all update together. Your designer confirms the final figure after a free site visit.
Quick answer
Elixir's modular kitchen designers in Pammal fit compact, straight-line kitchens with full-height storage, a loft and sturdy drawers, adding only the accessories that solve a real problem. A typical 2BHK kitchen costs approximately ₹50K – ₹93K in Basic, ₹60K – ₹1.1L in Premium and ₹70K – ₹1.3L in Ultra Premium, pre-GST. Start with a free consultation.
Our approach
How we handle modular kitchen projects
What we plan for
- Work triangle between hob, sink and fridge
- Appliance sizes and electrical points
- Tall unit and pantry pull-out planning
- Chimney, exhaust and ventilation
What drives the cost
- Running length of base and wall cabinets
- Shutter finish (laminate, acrylic, PU)
- Hardware such as tandem drawers, corner units and lift-ups
- Countertop and backsplash scope
Materials we recommend
- BWP plywood carcasses for wet zones near the sink
- Edge-banded shutters to resist Chennai humidity
- Soft-close hinges and channels from branded hardware makers
- Quartz or granite chosen before production so cut-outs line up
Mistakes to avoid
- Finalising cabinets before appliance models are chosen
- Too few drawers and too many hinged shutters
- Ignoring exhaust and chimney ducting
- Leaving the countertop decision until installation
GST Road & southern suburbs · PIN 600075
Planning interiors in Pammal
A residential suburb near the airport with independent homes and small apartment buildings.
- Straight-line kitchens are common in Pammal's compact flats, so the wall above the counter carries much of the storage.
- Some smaller buildings lack a utility area, so the washing machine may need a planned spot in or near the kitchen.
- BWP plywood under the sink and sealed edges protect the most water-exposed cabinets.
- Families often choose Basic cabinets with soft-close drawers as a single, noticeable upgrade.
Our work
Homes we've designed near Pammal
Real Elixir homes in Chennai. Every project is measured, designed, produced and installed by our team.
OMR Chennai · 1100 sq ft · 8 weeks
Adyar Chennai · 1620 sq ft · 5 weeks
Velachery Chennai · 1250 sq ft · 8 weeks
Talk to a real designer
Numbers are a starting point. A designer gets you the real one.
Every home is different. A 20-minute conversation with one of our designers usually narrows the range a lot, and often finds savings you wouldn't spot on your own. It's free and there's no obligation.
Before & after
A better version of your home
Drag the slider to see what a well-planned interior does to the same room. Premium finishes and smart storage, planned around how you live.
Try it yourself
Estimate your own home
Adjust the home size, package and scope. Numbers update instantly using the same rate card as this page.
Use the carpet area from your sale agreement, not super built-up.
Your approximate estimate
₹50K – ₹93K
≈ ₹60/sq ft – ₹110/sq ft of carpet area · pre-GST
- Modular kitchen₹50K – ₹93K
A rough guide only. Layout, finishes, hardware and site conditions can move the final number in either direction, and a designer can usually find ways to fit your budget.
Plan smarter
Five ways to keep your budget on track
- 01
Plan the wall above the counter
Use wall cabinets and a loft to carry vessels, groceries and occasional items, since the base run is short.
- 02
Choose drawers for the base
Deep drawers make better use of a short base run than shutters with fixed shelves.
- 03
Fit the fridge in early
Decide the fridge position first; in a straight-line kitchen it often sets where the counter ends.
- 04
Keep water away from wood
Use BWP plywood under the sink and plan any washing machine spot with proper drain and water inlet.
- 05
Lock the countertop before production
Choose granite or quartz early so sink and hob cut-outs align with the cabinets.
Happy homes
2,500+ Chennai families have moved in with Elixir
Since 2013, we've designed and built homes across Chennai, backed by a 12-year woodwork warranty and after-care from the same team.
Priya & Arvind
4BHK in Anna Nagar, Chennai.
"Small space, big impact. Every corner feels intentional. It's deeply personal."
Materials & hardware partners
FAQ
Questions homeowners ask
Still unsure? Our designers are happy to answer anything on a call.
How do you get enough storage in a straight kitchen?
By using the full wall height with cabinets and a loft, choosing deep base drawers and adding a tall unit if there is space beside the fridge.
Can a washing machine go in the kitchen?
Yes, with a dedicated water inlet and drain. The designer plans it so water stays away from wooden cabinets.
Which accessories are worth it?
A cutlery tray and a plate rack cover most needs. A bottle pull-out helps if the base run allows.
How long does production take?
Production typically takes 15–20 working days after design approval, followed by installation once the countertop is fixed.
Which shutter finish lasts best?
Laminate on good plywood is durable and easy to clean. Acrylic and PU look glossier but need gentler care.
Keep exploring
Related guides
Get a number you can actually plan with
Online estimates are a starting point. Our designers visit, measure and give you an itemised quote, usually within a week.