Elixir layout studio

14 × 14 ft Member Entry Layout for Coworking Spaces

Compare scaled 14 × 14 ft member entry layouts for coworking spaces. See what fits, test door swing and measure open floor area.

Open the planner
Living room seating group with a clear approach from the front of the room
Arrival inspiration: keep the first route into the room open.

Elixir · Layout study

Three ways to plan the room

Commercial arrival areas handle check-in, waiting, and onward movement at the same time. These options use movable desk and seating footprints to separate the welcome point from passing circulation.

Working canvas14 × 14 ft

14 × 14 ft/196 sq ft/3 of 3 layouts fit

Share this size
At a glance

Separate check-in and pickup leaves the most open floor area · 173.3 sq ft

Illustrative footprints only. Check actual openings, columns, connections, operating space, and applicable requirements on site. Shared links save room size; door settings stay in this session.

Study 01

Desk to one side

Fits
Desk to one side plan at 14 by 14 feetScaled room outline with 3 numbered furniture footprints, annotated wall dimensions. Element dimensions and the key appear in Plan notes.12314′ 0″14′ 0″FRONTBACK WALL
Open floor
171.5 sq ft
Clear rectangle
10′ 6″ × 12′ 0″
Plan notes 3 elements
  1. 1Reception counter2′ 0″ × 5′ 0″
  2. 2Waiting bench5′ 0″ × 2′ 0″
  3. 3Queue marker zone1′ 6″ × 3′ 0″

Place check-in along the left wall, a short waiting bench at the back, and a defined queue strip opposite the counter. Keep the middle as the route onward to the service or guest area.

Trade-off: This creates a clear sequence from arrival to waiting, but the waiting bench is farther from the counter than in a compact lobby.

Study 02

Counter facing entry

Fits
Counter facing entry plan at 14 by 14 feetScaled room outline with 3 numbered furniture footprints, annotated wall dimensions. Element dimensions and the key appear in Plan notes.12314′ 0″14′ 0″FRONTBACK WALL
Open floor
168.8 sq ft
Clear rectangle
10′ 2″ × 12′ 0″
Plan notes 3 elements
  1. 1Welcome counter6′ 0″ × 2′ 0″
  2. 2Waiting chairs2′ 6″ × 4′ 6″
  3. 3Guest bag shelf1′ 4″ × 3′ 0″

Set the counter on the back edge where it can be seen on entry. Put waiting chairs to one side and a small bag or parcel landing to the other, leaving a direct central approach.

Trade-off: A visible counter simplifies first-time orientation, but it becomes the visual focus and may be too formal for a small café or boutique.

Study 03

Separate check-in and pickup

Fits
Separate check-in and pickup plan at 14 by 14 feetScaled room outline with 3 numbered furniture footprints, annotated wall dimensions. Element dimensions and the key appear in Plan notes.12314′ 0″14′ 0″FRONTBACK WALL
Open floor
173.3 sq ft
Clear rectangle
9′ 6″ × 12′ 8″
Plan notes 3 elements
  1. 1Check-in counter2′ 0″ × 4′ 0″
  2. 2Pickup shelf3′ 6″ × 1′ 4″
  3. 3Waiting seats2′ 6″ × 4′ 0″

Keep staffed check-in on the left, collection or paperwork at the back, and waiting seats on the right. This suits spaces where visitors arrive for more than one type of service.

Trade-off: Distinct destinations reduce crowding at the desk, but visitors need clear signs to know which point to approach first.

The Elixir portfolio

Details worth a closer look

Photographs for design inspiration
Entry corridor leading toward a dining area beside a glass-front cabinet
Entry inspiration: a clear approach and shallow landing storage.
Wood display partition between an entry-side passage and living room
Entry inspiration: a permeable divider that softens direct sightlines.
Living area with a glass partition beside a television wall
Entry inspiration: glazed separation that preserves borrowed light.

Size study

What fits in 14 × 14 ft

3 of 3 footprints fit before reserving door swing.

Open floor and footprint conflicts
ArrangementFootprint resultLargest open rectangle
Desk to one side171.5 sq ft open floor126 × 144 in
Counter facing entry168.8 sq ft open floor122 × 144 in
Separate check-in and pickup173.3 sq ft open floor114 × 152 in
Where the door changes the plan

Each test reserves a 32-inch square at the centre of one wall. Move the door in the planner to check your opening.

  • front wall

    Desk to one side, Counter facing entry, Separate check-in and pickup

  • left wall

    Separate check-in and pickup

    Swing conflict: Desk to one side, Counter facing entry.

  • right wall

    Desk to one side

    Swing conflict: Counter facing entry, Separate check-in and pickup.

  • back wall

    Separate check-in and pickup

    Swing conflict: Desk to one side, Counter facing entry.

What an extra foot buys you

Changes to the largest clear rectangle before reserving door swing.

One foot wider · 15 × 14 ft

The same options fit.

  • Desk to one side: +12 in wide, 0 in deep
  • Counter facing entry: +12 in wide, 0 in deep
  • Separate check-in and pickup: +12 in wide, 0 in deep

One foot deeper · 14 × 15 ft

The same options fit.

  • Desk to one side: 0 in wide, +12 in deep
  • Counter facing entry: 0 in wide, +12 in deep
  • Separate check-in and pickup: 0 in wide, +12 in deep

Before you measure

Room notes and site checks
Layout
Keep the welcome desk beside the door and provide a separate pass-through route for members.
Detail
Use a simple wayfinding board and a small drop shelf; keep access devices visible but not dominant.
Trade-off
A staffed welcome point uses area that could hold extra desks.
  • Trace guest and member paths at busy arrival time
  • Check the desk is visible from the entrance
  • Simulate an arrival queue and a person leaving at the same time; note any crossing at the entrance.
  • Check counter staff can see the entry and reach stored paperwork without stepping into the queue.
  • Test the waiting setup with bags, mobility aids, or coats that visitors commonly bring.

Continue planning this space

Talk to a Designer